home categories contact about me store
This blog is part of at least one affiliate program. As an Amazon Associate I earn from qualifying purchases.
Showing posts with label SVG. Show all posts
Showing posts with label SVG. Show all posts

Wednesday, November 11, 2020

RV Renovation: Decor, Coffee Bar, Organization, and more

Now that everything has been repainted, the lights are working, and our travel trailer doesn't look like a complete construction zone, let's get to the fun stuff!

Decor or organization?  Why can't it be both?
We were forever struggling with where to put sunglasses in our camper.  Wallets, keys, etc. all had "their place," but sunglasses had been relegated to the ledge of molding around the main living area slide out.  I found this little framed piece of chicken wire, and I immediately knew what I was going to do!  I stained it, created and stained two small wooden blocks to "lift it" away from the wall, glued them to the backside of the frame, and screwed the whole thing to the wall.  I think it's perfect!  As soon as we walk in, we have a place for our glasses in addition to all of the other things.  I found a cute black and white buffalo plaid basket that now houses our shoes, too.   

These two cute baskets are admittedly holding fake herbs (even though I do love having real ones in our home), but they also serve to hold lemons, limes, onions, heads of garlic when we are camping.  Then, those items don't take up extra space in the refrigerator or my small pantry, and they're at my fingertips while cooking.  I wood-burned the little cutting board's handle for some extra personalization.
I had seen the cast iron flange and copper pipe paper towel holder in a few places, and I loved the idea.  I don't remember which "list of supplies" I used, but for the love of peaches...CHECK to make sure that all of the pieces fit and will work together before you leave the store.  Between the paper towel holder and the toilet paper holder, I made more unnecessary trips to our local home improvement store than I even want to admit.  Not all 1/2" elbows are created equally, and my list said I needed a 90 degree male/female or "street" elbow.  LIES!  (Of course, I'm certain they didn't *intentionally* mislead me.)  If I had really looked at the item in its tiny little bag or considered the male/female part of it, I would have known that it was the wrong item.
Here is our shoe bin again and the "Farmhouse" kitchen mat that I found on sale at the craft and decor store.

A few other things that took up entirely too much countertop space...or even just SPACE if I moved them off of the counter when not in use were my Instant Pot and coffee maker.  I had even recently downsized our Keurig to this super narrow Mini Keurig for tight spaces.  Still.  I needed some of that "real estate" back.  I feel like that was probably the HARDEST thing for me to find for the renovation.  I wanted something that would fit in this very small space with an easily accessible outlet when the camper was stationary.  I wanted it to be big enough to store the Instant Pot (or coffee maker) inside.  It also had to be able to be moved for when we are on the road.  The slide out occupies that space when the slides are pulled in.  I felt like I was searching for a unicorn.
This is what I found, and I LOVE it.  The Instant Pot is hidden inside.  The baskets hold coffee pods, cups, and more.  It's just big enough to serve as a coffee (and tea - my daughter would remind me) station, and it's not in the way.  I will say that we are having to make some "accommodations" for it so that when it is on 3 different levels of the flooring that it is sturdy and level.  (A low-profile custom "box" with 2 sections built up and indentations for the table's feet is the answer.  Then, when the table is stowed for travel, it is still level.  When it is in use, it sits atop this custom piece.)

We were camping at Halloween, and my daughter thought we really needed this cute pumpkin for the trip.  
The little "Coffee Time" tile was actually part of a small piece of framed art, but I removed the frame, added felt pads, and use it as a spoon rest so that 5 spoons aren't in the sink before we've even eaten breakfast.

Coffee station art also came with some very specific requirements, although not nearly as difficult to find/make as the little table itself.  Everything needed to be super low-profile for the slide to come in.  I actually had more pieces for this area, but I decided to make one based on the side of a barn that we see every time we are in Cuchara, Colorado.

I had used some inexpensive tongue and groove wood for the "faces" of my new cornices over the living room windows.  With 3 short pieces of the tongue and groove, I glued them together, stained them, and painted this little sign with a twist for our last name.  (I teased my husband often while doing this renovation that since I was doing "farmhouse" there would be roosters and chickens EVERYWHERE.  At one point, I think he actually started to get worried.)  So far, this is the only rooster in the whole RV, but I did find some super cute "farm" fabric that I need to make a pillow or something with.  

Originally, before I decided to do the super small coffee station, my "unicorn" had an even longer list of requirements.  I *REALLY* wanted a small table that fit in that space with drop-leaf extensions on opposite ends so that I could have a butcher-block island to help with counter space, meal prep, and serving.  I'm telling you that I searched for MONTHS.
I still had our oddly shaped table from the banquet in the camper. (I had been using it as an extra surface that we NEEDED.)  

I *wanted* one solid butcher block that would cover the full base of the table but still be narrow enough to use as a coffee table or an island.  The travel trailer's original table was adjustable height to accommodate an additional person to sleep.
Butcher blocks that big are EXPENSIVE.  We even looked at some that are really intended to top work benches and tool chests, but none of those were big enough.


Two IKEA cutting boards turned upside down, joined with brackets, and screwed to the original table base made for a $40 adjustable height coffee table / butcher-block island.  I *do* wish I had taken some time in IKEA to find 2 boards that more closely matched the grain of each other, but it's perfect for what I needed.

This was on the Halloween camping trip (maiden voyage after the makeover,) and I found my daughter with a breakfast of champions....

The buffalo plaid coasters seemed like a must.
Adventure Awaits SVG file can be found here.

In our bedroom, I added a little pressed tin "E" with a lamb's ear wreath, the kitchen towel blackout curtains, reclaimed wood wallpaper in the inset, and the vinyl I cut on my Silhouette.  "It's always better when we're together."  (Free SVG can be found here.)

I added several 3M Command hooks for the broom, towels, etc.  We also have an over the door hook rack that we will have face into the Master bedroom.  The little shelf above my window gives me a space to corral small items, my Kindle Paperwhite, etc. so they don't get lost or smashed in the small space of our bedroom.  I will likely add a photo to the wall on that shelf or just above it.  I knew which ones I wanted in the kids' room, but I haven't chosen any for our room.

The bunkhouse....
As you enter the bunkhouse, there are 3 MixTiles photos of the kids and our boxer on the beach and some additional hooks for the kids specifically.

Here it is painted, but before I finished getting bedding and converting some of the banquette cushions to back cushions for each of the bunks.

As a super easy way to cover the banquette cushions for the kids to use on their beds, I ordered king-size pillow cases that have the "pocket" on the open end, and then did a quick sew job (on the already sewn edges) to make them the exact right size for each cushion.
Here, you can also see that there's a light blanket on the bed and a heavier fluffy one at the foot of each bed.  The 2 cub couches no longer shed that nasty pleather and are fully functional to make into 2 twin beds in the bunkhouse.

I added little ledge shelves for each kid to store their phone, a book, or other small items that would otherwise get lost in the bed.


Our travel trailer bathroom....
Possibly everyone's favorite functional upgrade to the camper is a new bathroom doorknob that LOCKS.  😜
The new shower curtain is plastic, and I cut it to be the size I wanted.  I had to order some more of the track curtain holders and hooks to accommodate the new curtain.  The geometric clear section allows for more light while taking a shower (without being a "window" into the shower.)
I added hooks EVERYWHERE in the bathroom.  33 to be exact.  I added them directly to the wall, on boards, and over the door.  With a family of 5, by the time you have hand towels, wash cloths, towels for showers, the beach, etc., we need a lot of hooks.

I made this little shelf with a piece of leftover wood from one of the other projects.  I painted it white, added 2 L brackets, screwed the "Wash up, Buttercup" sign and the little fake plant to the board from the under side, and attached it to the wall over those oh-so-cute (but still what nightmares are made of) hexagon Tic Tac Tiles.
There are a few more things that I plan to do in the travel trailer, but I couldn't be happier with our first wave of renovations!

Check out the rest of my RV posts here.

Thursday, November 5, 2020

RV Renovation: Interior Lighting, Wallpaper, Vinyl, FREE SVGs, and More

I hope you're enjoying the journey of our travel trailer makeover.  It moves much more quickly for you in the blog world than it did for me in the actual real-life makeover, but I'm getting to relive the drastic transformation without having to go through all of the work again.

There were 2 spots in the camper that I've not been able to find new lights for due to the space required for the slides to come in.  One is in the bunkhouse, and the other is in the main living area.  For now, we'll keep the standard lights there, and I'm not entirely concerned if they don't ever get replaced.

I found these super cute Farmhouse Cage Lights, and I ordered them immediately!  I was so excited to get them installed.  They came with Edison bulbs that were perfect (or so I thought,) and I all but dragged my husband out to the storage facility to install them.  They wouldn't turn on.  He tried several different things, and we were trouble-shooting all kinds of things.  We spent about 2 weeks trying to get them to turn on.  Then, I found it!  I hadn't seen it on any of the blogs I had been reading, but sure enough...some campers ONLY support 12v bulbs.  Sure, we plug in with 50 amps to run our air conditioners, but our camper only supports 12v bulbs.  I was so excited to have these beauties come on as soon as we got 12v Edison bulbs!  The moral of the story is to make sure your light bulb matches the voltage of the existing fixtures whether it's 120v or 12v, be sure you know how your camper is wired.



Reclaimed Shiplap Peel & Stick Wallpaper

Yes, I painted our bathroom door that dark Iron Ore gray, because it gets so much traffic.  What you may NOT notice is that the cheap doorknob with no lock is GONE. Sayonara, sucker!  A new black doorknob with a lock has replaced it.  This is one upgrade that EVERYONE was excited about.  Why we didn't do it sooner, I have no idea.

I initially only bought a couple of rolls of this Peel & Stick Wallpaper.  (You want to make sure they were made in the same batch/lot so that the colors match, so it's good to order them all at once.)  I ended up using it in more places than I originally thought I would, and I had to order a 3rd roll.  Fortunately it matches my 2 original rolls.  I used it on the 2 walls you see here, one next to the main slide out, a wall as you enter the bunkhouse, on the master sliding door, and as an accent in our Master bedroom.

You can see the smudges on the chalk map above.  I initially used regular chalk, but of course, someone needed to touch it to see if it was real chalk.  So, I brought my chalk markers out and have labeled the states our RV has visited.
Chalk Map Peel & Stick Giant Decal
I cut the "Adventure Awaits" on my Silhouette,
and you can have that SVG file for FREE below.

I'm not a giant by any stretch, but I frequently bump my head on the slide out ceiling or lights even when they were the super low-profile standard camper lights that came with it.  I was determined to find a way to create something that is low profile that has a switch.  I wandered around our home improvement stores, and this is what I came up with!  

A piece of thin wood, some stain, black cast iron floor flange, a cast iron elbow, a coupler, a lamp receptacle, and wire.  (These were MUCH more affordable to make than some of my other lighting choices.)

I was able to find a coupler that fit perfectly over the base of the lamp receptacle, so once we had the new lamp receptacle wired, we super glued it inside of the coupler before assembling the light fixture.  The lamp receptacles I found were all for 3 way lights.  My light isn't 3 way, so I just click it twice to turn on and twice to turn off.  We made 2 of these for the living area in the slide out, and I have something very similar planned for over my kitchen sink.  Instead of having 1 light using an elbow, I have a T-pipe so that it will have 2 lights to brighten my sink and countertops like daylight. 
Barn Light and DIY Industrial Light

I ordered the barn light and was thrilled when it arrived.  I took it out of the box, and then it hit me....  There's not a SWITCH for that light like there is for the ceiling lights.  Fortunately, I had not yet thrown away the little MIS-MATCHED (yes, it really did annoy me that they were different colors) sconce light that came in the camper.  We pulled the wiring and button from it, and added it to my new barn light.  We added another 12v Edison, and it's perfect!
In our camper's bunkhouse alone, there are at least 6 light bulbs.  In the main living area, there were 14 light bulbs.  They put off a LOT of heat, and I've seen some RVs that actually have burn marks from those bulbs.  I knew I wanted to replace many of the fixtures (and I'm not done quite yet,) but this also gave us some incentive to replace all of the bulbs in the lights we were keeping with LED 12 volt bulbs.  The kids will actually turn their lights on now, because they don't feel like they have a heater next to their heads!

Standard Light Fixture in an RV
Standard Light on the left, LED on the right


When the lights are off, you really have to look to see if there's an incandescent or LED bulb.  Our incandescent lights were very "warm" literally and visually.  The LEDs are a more neutral white, and they don't emit the heat!

The same Reclaimed Shiplap Peel & Stick Wallpaper from the living area, but turned sideways in the Master Bedroom.

I cut this with my Silhouette as well, but I've tried to remove our wedding anniversary below the arrows from the image for the blog.  FREE Downloadable SVG is below.


Check out the rest of my RV posts here.